Battery Replacement

Tools required:

1 x Philips screwdriver

Step 1:

 Remove your Bikebac Tracker and turn it over to reveal the 4 screws.

Step 2:

Using a Phillips screwdriver, remove all 4 screws.

Step 3:

Hold it together and turn it over so the logo is facing you, then carefully remove the faceplate.

Step 4:

Using your finger, carefully remove the battery using the gap on the left.

Step 5:

take your new battery, make sure the + sign is facing you and carefully insert the new battery into the slot and under the tab. The tracker will beep once in place.

Step 6:

Perform steps 3 to 1 in reverse order.



1.⁠ ⁠Unpair the tracker from your Find My app.

2.⁠ ⁠Press and hold the button on the bottom of the tracker. It should beep as you press it.

3.⁠ ⁠After 3 seconds it will beep again, keep holding until after 6 seconds it beeps a third time.

4.⁠ ⁠Pair the tracker in your Find My app again.